Drywall Cutting and Multifunction Bench Wyandanch NY

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights.

Local Companies

Roberts Plywood Co.
800-422-4944
45 North Industry Court
Deer Park, NY
Costello's Ace Hardware
(516) 798-5757
5135 Merrick Rd, Gino's
Massapequa Park, NY
ABC Supply Co.,Inc/Bohemia
631-285-7710
2950 Veterans Memorial Hwy Bohemia, NY, 11716
Bohemia, NY
Brinkmann Hardware
(631) 363-2116
125 Montauk Hwy
Blue Point, NY
The Home Depot
(631)493-2320
65 Crooked Hill Road
Commack, NY
EXOTIC WOODS USA
(631) 651-8651
698 Fort Salonga Rd
Northport, NY
Suburban Mills
631-351-6445
16 Railroad St
Huntington Station, NY
Costello's Ace Hardware
(631) 321-1316
515 Montauk Hwy, Big Lots and Pathmark
West Babylon, NY
Lowe's of Farmingdale
631-927-3470
90 Price Parkway Farmingdale, NY, 11735
Farmingdale, NY
The Home Depot
(516)488-8500
600 Hempstead Turnpike
Elmont, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 14, 2008

By Section Editor: Mike Morris

Drywall Cutting

The BladeRunner drywall cutting tool is an amazing innovation that does the seemingly impossible. The tool separates into two, and then, connected only by powerful built-in magnets, the half placed on one side of a drywall sheet precisely follows the cut line of the tool half on the opposite side, scoring both sides of 1/2-inch or 5/8-inch drywall simultaneously to make straight, curved, or angle cuts in a single pass. Price: $80. 866-562-4229. GoldblattBladeRunner.com .

Multifunction Bench

Vika USA

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights. The MDF-surface work table setup includes a surge-protected 120-volt power strip. Price: $150. 800-845-2872. vikausa.com .

Click here to read full article from Tools of the Trade

Related Articles
- Festool Circ Saw and Guide Rail System Wyandanch NY
The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site.
- Festool Joining System Wyandanch NY
- Dry Window Products Wyandanch NY
- Hand-Held Power Saws Wyandanch NY
- Electric Chainsaws Wyandanch NY
- Framer's Guide to Engineered Lumber Wyandanch NY
- Hand Tools Wyandanch NY
- Drywall Finishing Wyandanch NY
- Home Improvement Tools Wyandanch NY