Drywall Cutting and Multifunction Bench Webster NY

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights.

Local Companies

Ace Hardware Rochester
(585) 594-1110
3861 Buffalo Rd, West of Manitou Rd.
Rochester, NY
Lyell Crest True Value
(585) 429-6720
2232 Lyell Ave
Rochester, NY
The Home Depot
(585)223-2510
7600 Commons Blvd
Victor, NY
Kmart 3282 / Cross Merch
(585) 426-0760
810 Paul Rd
Rochester, NY
Victor - A
(585) 421-3300
200 Eastview Mall
Victor, NY
Woodcraft - Rochester
585-292-9690
Henrietta Plaza
Rochester, NY
LOWE'S OF HENRIETTA, N. Y.
585 424-1340
2350 MARKETPLACE DRIVE ROCHESTER, NY, 14623
Rochester, NY
The Home Depot
(585)385-4090
750 Panorama Trails So
Rochester, NY
Lowe's
(585) 453-7500
3150 West Ridge Road
Rochester, NY
Kmart 7608 / Cross Merch
(585) 223-8310
10 Cobblestone Court Dr
Victor, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 14, 2008

By Section Editor: Mike Morris

Drywall Cutting

The BladeRunner drywall cutting tool is an amazing innovation that does the seemingly impossible. The tool separates into two, and then, connected only by powerful built-in magnets, the half placed on one side of a drywall sheet precisely follows the cut line of the tool half on the opposite side, scoring both sides of 1/2-inch or 5/8-inch drywall simultaneously to make straight, curved, or angle cuts in a single pass. Price: $80. 866-562-4229. GoldblattBladeRunner.com .

Multifunction Bench

Vika USA

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights. The MDF-surface work table setup includes a surge-protected 120-volt power strip. Price: $150. 800-845-2872. vikausa.com .

Click here to read full article from Tools of the Trade

Related Articles
- Hand Tools Webster NY
The Sonic Tape, a distance-measuring device from AGL Lasersource can be used to determine length, width, and height and to compute area and volume. The tool has a range from 2 feet to 50 feet and an accuracy of 99.5 percent.
- Festool Circ Saw and Guide Rail System Webster NY
- Dry Window Products Webster NY
- Drywall Finishing Webster NY
- Electric Chainsaws Webster NY
- Framer's Guide to Engineered Lumber Webster NY
- Festool Joining System Webster NY
- Hand-Held Power Saws Webster NY
- Home Improvement Tools Webster NY