Drywall Cutting and Multifunction Bench Selden NY

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights.

Local Companies

Roberts Plywood Co.
800-422-4944
45 North Industry Court
Deer Park, NY
Shinnecock Hardware
(631) 728-4602
91 W Montauk Hwy
Hampton Bays, NY
Bens True Value Hardware
(631) 775-7435
55b Route 25 (middle Country Road)
Coram, NY
Ferreteria Solar El Almacigo, Inc
(787) 856-2670
Bo Almacigo Bajo Carr 371 Km 1.4
Yauco, NY
Shirley - Sears Hardware Stores
(631) 281-7686
1019 Montauk Hwy
Shirley, NY
EXOTIC WOODS USA
(631) 651-8651
698 Fort Salonga Rd
Northport, NY
Suburban Mills
631-351-6445
16 Railroad St
Huntington Station, NY
ABC Supply Co.,Inc/Bohemia
631-285-7710
2950 Veterans Memorial Hwy Bohemia, NY, 11716
Bohemia, NY
Comercial Tortuguero, Inc
(787) 858-2965
Carr #2 Km 41.3
Vega Baja, NY
The Home Depot
(631)286-4665
10 Gateway Blvd
Patchogue, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 14, 2008

By Section Editor: Mike Morris

Drywall Cutting

The BladeRunner drywall cutting tool is an amazing innovation that does the seemingly impossible. The tool separates into two, and then, connected only by powerful built-in magnets, the half placed on one side of a drywall sheet precisely follows the cut line of the tool half on the opposite side, scoring both sides of 1/2-inch or 5/8-inch drywall simultaneously to make straight, curved, or angle cuts in a single pass. Price: $80. 866-562-4229. GoldblattBladeRunner.com .

Multifunction Bench

Vika USA

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights. The MDF-surface work table setup includes a surge-protected 120-volt power strip. Price: $150. 800-845-2872. vikausa.com .

Click here to read full article from Tools of the Trade

Related Articles
- Hand Tools Selden NY
The Sonic Tape, a distance-measuring device from AGL Lasersource can be used to determine length, width, and height and to compute area and volume. The tool has a range from 2 feet to 50 feet and an accuracy of 99.5 percent.
- Festool Circ Saw and Guide Rail System Selden NY
- Electric Chainsaws Selden NY
- Hand-Held Power Saws Selden NY
- Framer's Guide to Engineered Lumber Selden NY
- Festool Joining System Selden NY
- Drywall Finishing Selden NY
- Home Improvement Tools Selden NY
- Dry Window Products Selden NY