Drywall Cutting and Multifunction Bench Port Jefferson Station NY

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights.

Local Companies

Roberts Plywood Co.
800-422-4944
45 North Industry Court
Deer Park, NY
Costello's Ace Hardware
(631) 925-5500
822 Fort Salonga Rd, Walgreens
Northport, NY
Kass Ind Supply/Islandia
(631) 234-0740
3104 Expressway Drive South Islandia, NY, 11749
Islandia, NY
UNIVERSAL TOOL
(631) 281-4147
1175 MONTAUK HIGHWAY MASTIC, NY, 11950
Mastic, NY
Smith-Haven Mall
(631) 361-5259
4 Smith Haven Mall
Lake Grove, NY
EXOTIC WOODS USA
(631) 651-8651
698 Fort Salonga Rd
Northport, NY
Suburban Mills
631-351-6445
16 Railroad St
Huntington Station, NY
Lowe's
(631) 406-2015
2150 Nesconset Highway
Stony Brook, NY
LOWE'S OF MEDFORD, NY
631 207-4541
2796 ROUTE 112 MEDFORD, NY, 11763
Medford, NY
Ferreteria Berrios Inc
(787) 786-2095
Av Comerio #25 Sierra Bayamon
Bayamon, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 14, 2008

By Section Editor: Mike Morris

Drywall Cutting

The BladeRunner drywall cutting tool is an amazing innovation that does the seemingly impossible. The tool separates into two, and then, connected only by powerful built-in magnets, the half placed on one side of a drywall sheet precisely follows the cut line of the tool half on the opposite side, scoring both sides of 1/2-inch or 5/8-inch drywall simultaneously to make straight, curved, or angle cuts in a single pass. Price: $80. 866-562-4229. GoldblattBladeRunner.com .

Multifunction Bench

Vika USA

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights. The MDF-surface work table setup includes a surge-protected 120-volt power strip. Price: $150. 800-845-2872. vikausa.com .

Click here to read full article from Tools of the Trade

Related Articles
- Framer's Guide to Engineered Lumber Port Jefferson Station NY
Engineered lumber does everything solid-sawn lumber does, except better. It's stronger, lighter, straighter, and more stable. But working with I-joists and laminated veneer lumber (LVL) is different than solid-sawn lumber, so check out these tips for getting better, faster results.
- Drywall Finishing Port Jefferson Station NY
- Hand-Held Power Saws Port Jefferson Station NY
- Festool Circ Saw and Guide Rail System Port Jefferson Station NY
- Festool Joining System Port Jefferson Station NY
- Dry Window Products Port Jefferson Station NY
- Hand Tools Port Jefferson Station NY
- Home Improvement Tools Port Jefferson Station NY
- Electric Chainsaws Port Jefferson Station NY