Drywall Cutting and Multifunction Bench Pittsford NY

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights.

Local Companies

Woodcraft - Rochester
585-292-9690
Henrietta Plaza
Rochester, NY
J. Kozel/Tool Ranch
(585) 436-9807
1150 Scottsville Rd Rochester, NY, 14624
Rochester, NY
Lowe's of Macedon
315-903-9962
1605 Macedon Parkway Macedon, NY, 14502
Macedon, NY
Victor Coal & Lumber Inc
585-924-3033
32 School Street
Victor, NY
Beyond Hardware
(585) 377-5540
2155 Penfield Road
Penfield, NY
Bristol Valley Hardwoods of Rochester
585-229-5695
4054 Bristol Valley Road Route 64
Canandaigua, NY
HARMCO FASTENER CO INC
585-546-1650
428 State Street Rochester, NY, 14608
Rochester, NY
LOWE'S OF HENRIETTA, N. Y.
585 424-1340
2350 MARKETPLACE DRIVE ROCHESTER, NY, 14623
Rochester, NY
Crown Electric Supply Co Inc
585-265-2480
75 Route 104
Union Hill, NY
Avon True Value & Auto
(585) 226-8996
275 E Main Street
Avon, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 14, 2008

By Section Editor: Mike Morris

Drywall Cutting

The BladeRunner drywall cutting tool is an amazing innovation that does the seemingly impossible. The tool separates into two, and then, connected only by powerful built-in magnets, the half placed on one side of a drywall sheet precisely follows the cut line of the tool half on the opposite side, scoring both sides of 1/2-inch or 5/8-inch drywall simultaneously to make straight, curved, or angle cuts in a single pass. Price: $80. 866-562-4229. GoldblattBladeRunner.com .

Multifunction Bench

Vika USA

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights. The MDF-surface work table setup includes a surge-protected 120-volt power strip. Price: $150. 800-845-2872. vikausa.com .

Click here to read full article from Tools of the Trade