Drywall Cutting and Multifunction Bench Penfield NY

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights.

Local Companies

Mayer Hardware, Inc
(585) 288-7665
226 Winton Rd N
Rochester, NY
Fastenal- Rochester
585-232-2320
116 Saint Paul St Rochester, NY, 14604
Rochester, NY
LOWE'S OF WEBSTER, NY
585 787-7900
900 FIVE MILE LINE ROAD WEBSTER, NY, 14580
Webster, NY
Abrasive Tool Corp
585-254-4500
1555 Emerson Street
Rochester, NY
Kmart 7608 / Cross Merch
(585) 223-8310
10 Cobblestone Court Dr
Victor, NY
Woodcraft - Rochester
585-292-9690
Henrietta Plaza
Rochester, NY
Fastenal- Ontario
315-524-4255
1238 Route 104 Ontario, NY, 14519
Ontario, NY
HARMCO FASTENER CO INC
585-546-1650
428 State Street Rochester, NY, 14608
Rochester, NY
Secor Do it Best Hardware
315-332-2124
800 W Miller St., Ste B
Newark, NY
The Home Depot
(585)342-0970
1111 E Ridge Rd
Rochester, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 14, 2008

By Section Editor: Mike Morris

Drywall Cutting

The BladeRunner drywall cutting tool is an amazing innovation that does the seemingly impossible. The tool separates into two, and then, connected only by powerful built-in magnets, the half placed on one side of a drywall sheet precisely follows the cut line of the tool half on the opposite side, scoring both sides of 1/2-inch or 5/8-inch drywall simultaneously to make straight, curved, or angle cuts in a single pass. Price: $80. 866-562-4229. GoldblattBladeRunner.com .

Multifunction Bench

Vika USA

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights. The MDF-surface work table setup includes a surge-protected 120-volt power strip. Price: $150. 800-845-2872. vikausa.com .

Click here to read full article from Tools of the Trade

Related Articles
- Hand Tools Penfield NY
The Sonic Tape, a distance-measuring device from AGL Lasersource can be used to determine length, width, and height and to compute area and volume. The tool has a range from 2 feet to 50 feet and an accuracy of 99.5 percent.
- Festool Joining System Penfield NY
- Home Improvement Tools Penfield NY
- Hand-Held Power Saws Penfield NY
- Electric Chainsaws Penfield NY
- Dry Window Products Penfield NY
- Framer's Guide to Engineered Lumber Penfield NY
- Drywall Finishing Penfield NY
- Festool Circ Saw and Guide Rail System Penfield NY