Drywall Cutting and Multifunction Bench Middletown NY

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights.

Local Companies

Lowe's of Chester
845-572-2400
3924 Summerville Way Chester, NY, 10918
Chester, NY
LOWE'S OF NEWBURGH, NY
845 567-2860
1239 ROUTE 300 NEWBURGH, NY, 12550
Newburgh, NY
PRO TOOL INC
(845) 294-2781
110 NORTH CHURCH STREET GOSHEN, NY, 10924
Goshen, NY
Scotts Corners Hardware
845-457-5005
1037 State Route 17K
Montgomery, NY
Lowe's
(570) 491-9440
115 Wenlock Road
Matamoras, PA
Seekamp Lumber Co
(845) 361-2220
2551 Route 302
Middletown, NY
LOWE'S OF MIDDLETOWN, NY.
845 692-8044
700 NORTH GALLERIA DRIVE MIDDLETOWN, NY, 10941
Middletown, NY
MONROE WHOLESALE INC
(845) 294-7900
RT 17M BOX 461 GOSHEN, NY, 10924
Goshen, NY
Ace Hdwe of Ellenville
(845) 647-7850
140 S Main St, Next to D'lites Ice Cream Stand
Ellenville, NY
Neversink True Value Lumber
(845) 856-5161
95 Jersey Ave
Port Jervis, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 14, 2008

By Section Editor: Mike Morris

Drywall Cutting

The BladeRunner drywall cutting tool is an amazing innovation that does the seemingly impossible. The tool separates into two, and then, connected only by powerful built-in magnets, the half placed on one side of a drywall sheet precisely follows the cut line of the tool half on the opposite side, scoring both sides of 1/2-inch or 5/8-inch drywall simultaneously to make straight, curved, or angle cuts in a single pass. Price: $80. 866-562-4229. GoldblattBladeRunner.com .

Multifunction Bench

Vika USA

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights. The MDF-surface work table setup includes a surge-protected 120-volt power strip. Price: $150. 800-845-2872. vikausa.com .

Click here to read full article from Tools of the Trade