Drywall Cutting and Multifunction Bench Melville NY

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights.

Local Companies

Roberts Plywood Co.
800-422-4944
45 North Industry Court
Deer Park, NY
Costello's Ace Hardware
(631) 321-1316
515 Montauk Hwy, Big Lots and Pathmark
West Babylon, NY
Costello's Ace Hardware
(516) 798-0680
1330 Hicksville Rd, Marshalls
Massapequa, NY
Ferreteria Valois Pagan
(787) 844-2460
1478 Ave Tito Castro
Ponce, NY
The Home Depot
(631)493-2320
65 Crooked Hill Road
Commack, NY
EXOTIC WOODS USA
(631) 651-8651
698 Fort Salonga Rd
Northport, NY
Suburban Mills
631-351-6445
16 Railroad St
Huntington Station, NY
Botto Brothers Hardware
(516) 931-0816
231 Broadway
Hicksville, NY
Mar-Jam Supply Inc.
631-249-4900
885 Conklin Avenue
Farmingdale, NY
The Home Depot
(516)546-6280
160 E. Sunrise Hwy
Freeport, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 14, 2008

By Section Editor: Mike Morris

Drywall Cutting

The BladeRunner drywall cutting tool is an amazing innovation that does the seemingly impossible. The tool separates into two, and then, connected only by powerful built-in magnets, the half placed on one side of a drywall sheet precisely follows the cut line of the tool half on the opposite side, scoring both sides of 1/2-inch or 5/8-inch drywall simultaneously to make straight, curved, or angle cuts in a single pass. Price: $80. 866-562-4229. GoldblattBladeRunner.com .

Multifunction Bench

Vika USA

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights. The MDF-surface work table setup includes a surge-protected 120-volt power strip. Price: $150. 800-845-2872. vikausa.com .

Click here to read full article from Tools of the Trade

Related Articles
- Home Improvement Tools Melville NY
Aluminum Low-Profile side boxes maximize storage space without compromising rear-window visibility. The low-profile design sits just above the bed rail to keep rear sight lines intact. The reduced height is offset by an increased width to provide a larger storage area.
- Dry Window Products Melville NY
- Festool Circ Saw and Guide Rail System Melville NY
- Framer's Guide to Engineered Lumber Melville NY
- Festool Joining System Melville NY
- Hand Tools Melville NY
- Electric Chainsaws Melville NY
- Drywall Finishing Melville NY
- Hand-Held Power Saws Melville NY