Drywall Cutting and Multifunction Bench Mastic NY

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights.

Local Companies

Ace Hardware
(631) 929-5095
6281 Rte 25 A
Wading River, NY
Ferreteria Del Hogar True Value Hdwe.
(787) 793-1874
5 Tabonuco Caparra Ind Park
Guaynabo, NY
Ferreteria Valois Pagan
(787) 844-2460
1478 Ave Tito Castro
Ponce, NY
Kmart 3862 / Cross Merch
(631) 567-3060
5151 Sunrise Hwy
Bohemia, NY
Hauppauge - Sears Hardware Stores
(631) 979-2099
564 Veterans Hwy
Hauppauge, NY
Shinnecock Hardware
(631) 728-4602
91 W Montauk Hwy
Hampton Bays, NY
Ace Hardware
(631) 751-9500
Three Vlg Shpg Ctr, 1366 Rte 25 A, King Kullen Shopping Center
East Setauket, NY
Ferreteria Maderas 3-c Inc.
(787) 783-8260
Calle Segarra Final Sector Bechara
San Juan, NY
The Home Depot
(631)451-0685
346 Middle Country Rd
Coram, NY
Lake Ronkonkoma-Sears Hardware Stores
(631) 738-9457
585 Portion Rd
Lk Ronkonkoma, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 14, 2008

By Section Editor: Mike Morris

Drywall Cutting

The BladeRunner drywall cutting tool is an amazing innovation that does the seemingly impossible. The tool separates into two, and then, connected only by powerful built-in magnets, the half placed on one side of a drywall sheet precisely follows the cut line of the tool half on the opposite side, scoring both sides of 1/2-inch or 5/8-inch drywall simultaneously to make straight, curved, or angle cuts in a single pass. Price: $80. 866-562-4229. GoldblattBladeRunner.com .

Multifunction Bench

Vika USA

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights. The MDF-surface work table setup includes a surge-protected 120-volt power strip. Price: $150. 800-845-2872. vikausa.com .

Click here to read full article from Tools of the Trade

Related Articles
- Hand Tools Mastic NY
The Sonic Tape, a distance-measuring device from AGL Lasersource can be used to determine length, width, and height and to compute area and volume. The tool has a range from 2 feet to 50 feet and an accuracy of 99.5 percent.
- Festool Circ Saw and Guide Rail System Mastic NY
- Framer's Guide to Engineered Lumber Mastic NY
- Dry Window Products Mastic NY
- Drywall Finishing Mastic NY
- Home Improvement Tools Mastic NY
- Festool Joining System Mastic NY
- Hand-Held Power Saws Mastic NY
- Electric Chainsaws Mastic NY