Drywall Cutting and Multifunction Bench Hauppauge NY

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights.

Local Companies

Roberts Plywood Co.
800-422-4944
45 North Industry Court
Deer Park, NY
Costello's Ace Hardware
(631) 724-8300
246 Smithtown Blvd, CVS
Nesconset, NY
Lowe's of Bay Shore
631-954-9001
800 Sunrise Highway Bayshore, NY, 11706
Bayshore, NY
Smithtown Do it Best
631-863-3200
82 West Main Street
Smithtown, NY
Kmart 3861 / Cross Merch
(631) 661-1234
1000 Montauk Hwy
West Babylon, NY
EXOTIC WOODS USA
(631) 651-8651
698 Fort Salonga Rd
Northport, NY
Suburban Mills
631-351-6445
16 Railroad St
Huntington Station, NY
Lowe's
(631) 207-4541
2796 Route 112
Medford, NY
Costello's Ace Hardware
(631) 694-1100
1102 Broadhollow Rd, Corner of Rte. 110 & Main St.
Farmingdale, NY
Ferreteria Amador
(787) 898-4060
Buzon 94 Carretera 2 Km 88.3
Hatillo, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 14, 2008

By Section Editor: Mike Morris

Drywall Cutting

The BladeRunner drywall cutting tool is an amazing innovation that does the seemingly impossible. The tool separates into two, and then, connected only by powerful built-in magnets, the half placed on one side of a drywall sheet precisely follows the cut line of the tool half on the opposite side, scoring both sides of 1/2-inch or 5/8-inch drywall simultaneously to make straight, curved, or angle cuts in a single pass. Price: $80. 866-562-4229. GoldblattBladeRunner.com .

Multifunction Bench

Vika USA

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights. The MDF-surface work table setup includes a surge-protected 120-volt power strip. Price: $150. 800-845-2872. vikausa.com .

Click here to read full article from Tools of the Trade

Related Articles
- Home Improvement Tools Hauppauge NY
Aluminum Low-Profile side boxes maximize storage space without compromising rear-window visibility. The low-profile design sits just above the bed rail to keep rear sight lines intact. The reduced height is offset by an increased width to provide a larger storage area.
- Drywall Finishing Hauppauge NY
- Framer's Guide to Engineered Lumber Hauppauge NY
- Festool Joining System Hauppauge NY
- Festool Circ Saw and Guide Rail System Hauppauge NY
- Hand Tools Hauppauge NY
- Electric Chainsaws Hauppauge NY
- Dry Window Products Hauppauge NY
- Hand-Held Power Saws Hauppauge NY