Drywall Cutting and Multifunction Bench Flushing NY

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights.

Local Companies

Palmer Ace Hardware
(201) 262-0900
940 Kinderkamack Rd, Charlie Browns Restaurant in Oradell
River Edge, NJ
GENERAL MACHINERY INC
(212) 226-7835
358 BROOME STREET NEW YORK, NY, 10013
New York, NY
Active Lumber
718-492-5000
6119 7th Avenue
Brooklyn, NY
The Home Depot
(718)862-9800
1806 E Gunhill Rd
Bronx, NY
Kmart 7654 / Cross Merch
(718) 671-5377
300 Baychester Ave
Bronx, NY
Monster Woodshop
888-506-6678
607 18th Street
Brooklyn, NY
Fastenal- Bronx
718-409-9411
1600 Stillwell Bronx, NY, 10461
Bronx, NY
Garber Building Supply
718-447-2122
98 Greenfield Avenue
Staten Island, NY
The Home Depot
(973)680-8700
60 Orange St
Bloomfield, NJ
A W MEYER CO INC
(201) 945-5500
509 BROAD AVENUE RIDGEFIELD, NJ, 07657
Ridgefield, NJ
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 14, 2008

By Section Editor: Mike Morris

Drywall Cutting

The BladeRunner drywall cutting tool is an amazing innovation that does the seemingly impossible. The tool separates into two, and then, connected only by powerful built-in magnets, the half placed on one side of a drywall sheet precisely follows the cut line of the tool half on the opposite side, scoring both sides of 1/2-inch or 5/8-inch drywall simultaneously to make straight, curved, or angle cuts in a single pass. Price: $80. 866-562-4229. GoldblattBladeRunner.com .

Multifunction Bench

Vika USA

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights. The MDF-surface work table setup includes a surge-protected 120-volt power strip. Price: $150. 800-845-2872. vikausa.com .

Click here to read full article from Tools of the Trade

Related Articles
- Festool Joining System Flushing NY
Festool's Domino isn't just a brand new type of joining tool; it's a whole new joining system. Based on mortise-and-tenon joinery, the Domino combines the qualities of biscuits and dowels with a stronger, self-aligning joint.
- Festool Circ Saw and Guide Rail System Flushing NY
- Dry Window Products Flushing NY
- Home Improvement Tools Flushing NY
- Framer's Guide to Engineered Lumber Flushing NY
- Hand Tools Flushing NY
- Drywall Finishing Flushing NY
- Electric Chainsaws Flushing NY
- Hand-Held Power Saws Flushing NY