Drywall Cutting and Multifunction Bench Fairport NY

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights.

Local Companies

Woodcraft - Rochester
585-292-9690
Henrietta Plaza
Rochester, NY
Fastenal- Rochester
585-232-2320
116 Saint Paul St Rochester, NY, 14604
Rochester, NY
Walworth Hardware
315-986-1492
3700 Main St
Walworth, NY
The Home Depot
(585)865-1900
1250 West Ridge Road
Greece, NY
Kmart 3282 / Cross Merch
(585) 426-0760
810 Paul Rd
Rochester, NY
Bristol Valley Hardwoods of Rochester
585-229-5695
4054 Bristol Valley Road Route 64
Canandaigua, NY
Williamson Hardware Inc
(315) 589-4011
4101 Main St & Rte 21, Main Street & Rt 21 At the Four Corners
Williamson, NY
LOWE'S OF GREECE, NY
585 453-7500
3150 WEST RIDGE ROAD ROCHESTER, NY, 14626
Rochester, NY
Lyell Crest True Value
(585) 429-6720
2232 Lyell Ave
Rochester, NY
Kmart 3295 / Cross Merch
(716) 227-4350
3049 W Ridge Rd
Rochester, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 14, 2008

By Section Editor: Mike Morris

Drywall Cutting

The BladeRunner drywall cutting tool is an amazing innovation that does the seemingly impossible. The tool separates into two, and then, connected only by powerful built-in magnets, the half placed on one side of a drywall sheet precisely follows the cut line of the tool half on the opposite side, scoring both sides of 1/2-inch or 5/8-inch drywall simultaneously to make straight, curved, or angle cuts in a single pass. Price: $80. 866-562-4229. GoldblattBladeRunner.com .

Multifunction Bench

Vika USA

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights. The MDF-surface work table setup includes a surge-protected 120-volt power strip. Price: $150. 800-845-2872. vikausa.com .

Click here to read full article from Tools of the Trade

Related Articles
- Festool Circ Saw and Guide Rail System Fairport NY
The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site.
- Festool Joining System Fairport NY
- Electric Chainsaws Fairport NY
- Drywall Finishing Fairport NY
- Dry Window Products Fairport NY
- Hand-Held Power Saws Fairport NY
- Home Improvement Tools Fairport NY
- Framer's Guide to Engineered Lumber Fairport NY
- Hand Tools Fairport NY