Drywall Cutting and Multifunction Bench East Northport NY

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights.

Local Companies

Roberts Plywood Co.
800-422-4944
45 North Industry Court
Deer Park, NY
Woodcraft - Norwalk, CT
(203) 847-9663
215 Westport Ave
Norwalk, CT
DYNAMITE TOOL CO
(631) 563-8181
1551 SMITHTOWN AVENUE BOHEMIA, NY, 11716
Bohemia, NY
Ferreteria Maderas 3-c Inc.
(787) 783-8260
Calle Segarra Final Sector Bechara
San Juan, NY
5137 Nesconset Hwy
(631) 476-0438
Rr 347
Pt Jefferson, NY
EXOTIC WOODS USA
(631) 651-8651
698 Fort Salonga Rd
Northport, NY
Suburban Mills
631-351-6445
16 Railroad St
Huntington Station, NY
Costello's Ace Hardware
(631) 321-1316
515 Montauk Hwy, Big Lots and Pathmark
West Babylon, NY
Ace Hardware
(631) 751-9500
Three Vlg Shpg Ctr, 1366 Rte 25 A, King Kullen Shopping Center
East Setauket, NY
The Home Depot
(631)789-9200
1101 Sunrise Highway
Copiague, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 14, 2008

By Section Editor: Mike Morris

Drywall Cutting

The BladeRunner drywall cutting tool is an amazing innovation that does the seemingly impossible. The tool separates into two, and then, connected only by powerful built-in magnets, the half placed on one side of a drywall sheet precisely follows the cut line of the tool half on the opposite side, scoring both sides of 1/2-inch or 5/8-inch drywall simultaneously to make straight, curved, or angle cuts in a single pass. Price: $80. 866-562-4229. GoldblattBladeRunner.com .

Multifunction Bench

Vika USA

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights. The MDF-surface work table setup includes a surge-protected 120-volt power strip. Price: $150. 800-845-2872. vikausa.com .

Click here to read full article from Tools of the Trade

Related Articles
- Home Improvement Tools East Northport NY
Aluminum Low-Profile side boxes maximize storage space without compromising rear-window visibility. The low-profile design sits just above the bed rail to keep rear sight lines intact. The reduced height is offset by an increased width to provide a larger storage area.
- Hand Tools East Northport NY
- Electric Chainsaws East Northport NY
- Festool Joining System East Northport NY
- Drywall Finishing East Northport NY
- Hand-Held Power Saws East Northport NY
- Dry Window Products East Northport NY
- Festool Circ Saw and Guide Rail System East Northport NY
- Framer's Guide to Engineered Lumber East Northport NY