Drywall Cutting and Multifunction Bench Corning NY

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights.

Local Companies

Fastenal- Elmira
607-737-9062
1336 College Ave Elmira, NY, 14901
Elmira, NY
Shirley's Of Bath Inc.
607-776-2051
7285 Route 54
Bath, NY
Horseheads Do it center
607-739-5616
124 North Main Street
Horseheads, NY
Valu Home Centers
607-732-3200
1105 Broadway Ave
Elmira, NY
The Home Depot
(607)936-1400
3160 Silverback Lane
Painted Post, NY
Garreson Lumber Company
607-566-8558
7201 Craig Rd.
Bath, NY
LOWE'S OF BIG FLATS, N.Y.
607 739-6106
913 COUNTY RD, RT 64 ELMIRA, NY, 14903
Elmira, NY
The Bath Building Co
607-776-1333
Bath Plaza, Washington Bl
Bath, NY
Valu Home Centers
607-936-9900
Ames Plaza 1000 Victory H
Painted Post, NY
Draper True Value Hdw
(570) 537-6566
5277 Main St
Millerton, PA
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 14, 2008

By Section Editor: Mike Morris

Drywall Cutting

The BladeRunner drywall cutting tool is an amazing innovation that does the seemingly impossible. The tool separates into two, and then, connected only by powerful built-in magnets, the half placed on one side of a drywall sheet precisely follows the cut line of the tool half on the opposite side, scoring both sides of 1/2-inch or 5/8-inch drywall simultaneously to make straight, curved, or angle cuts in a single pass. Price: $80. 866-562-4229. GoldblattBladeRunner.com .

Multifunction Bench

Vika USA

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights. The MDF-surface work table setup includes a surge-protected 120-volt power strip. Price: $150. 800-845-2872. vikausa.com .

Click here to read full article from Tools of the Trade

Related Articles
- Framer's Guide to Engineered Lumber Corning NY
Engineered lumber does everything solid-sawn lumber does, except better. It's stronger, lighter, straighter, and more stable. But working with I-joists and laminated veneer lumber (LVL) is different than solid-sawn lumber, so check out these tips for getting better, faster results.
- Festool Circ Saw and Guide Rail System Corning NY
- Hand-Held Power Saws Corning NY
- Home Improvement Tools Corning NY
- Electric Chainsaws Corning NY
- Drywall Finishing Corning NY
- Hand Tools Corning NY
- Dry Window Products Corning NY
- Festool Joining System Corning NY