Drywall Cutting and Multifunction Bench Central Islip NY

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights.

Local Companies

Roberts Plywood Co.
800-422-4944
45 North Industry Court
Deer Park, NY
Costello's Ace Hardware
(631) 925-5500
822 Fort Salonga Rd, Walgreens
Northport, NY
SUNRISE TOOL SERVICE
631-661-5548
124 SUNRISE HIGHWAY WEST ISLIP, NY, 11795
West Islip, NY
Trio Hardware
516-935-8385
1032 C Old Country Rd
Plainview, NY
Patchogue - Sears Hardware Stores
(631) 447-7304
367 Sunrise Hwy 389
Patchogue, NY
EXOTIC WOODS USA
(631) 651-8651
698 Fort Salonga Rd
Northport, NY
Suburban Mills
631-351-6445
16 Railroad St
Huntington Station, NY
Lowe's
(631) 207-4541
2796 Route 112
Medford, NY
Ace Hardware
(631) 751-9500
Three Vlg Shpg Ctr, 1366 Rte 25 A, King Kullen Shopping Center
East Setauket, NY
Comercial Don Benja
(787) 899-3025
Hc 03 Box 27150 Carr 116 Km 0.8
Lajas, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 14, 2008

By Section Editor: Mike Morris

Drywall Cutting

The BladeRunner drywall cutting tool is an amazing innovation that does the seemingly impossible. The tool separates into two, and then, connected only by powerful built-in magnets, the half placed on one side of a drywall sheet precisely follows the cut line of the tool half on the opposite side, scoring both sides of 1/2-inch or 5/8-inch drywall simultaneously to make straight, curved, or angle cuts in a single pass. Price: $80. 866-562-4229. GoldblattBladeRunner.com .

Multifunction Bench

Vika USA

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights. The MDF-surface work table setup includes a surge-protected 120-volt power strip. Price: $150. 800-845-2872. vikausa.com .

Click here to read full article from Tools of the Trade

Related Articles
- Framer's Guide to Engineered Lumber Central Islip NY
Engineered lumber does everything solid-sawn lumber does, except better. It's stronger, lighter, straighter, and more stable. But working with I-joists and laminated veneer lumber (LVL) is different than solid-sawn lumber, so check out these tips for getting better, faster results.
- Electric Chainsaws Central Islip NY
- Home Improvement Tools Central Islip NY
- Dry Window Products Central Islip NY
- Festool Joining System Central Islip NY
- Hand Tools Central Islip NY
- Hand-Held Power Saws Central Islip NY
- Festool Circ Saw and Guide Rail System Central Islip NY
- Drywall Finishing Central Islip NY