Drywall Cutting and Multifunction Bench Cambria Heights NY

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights.

Local Companies

Soundview Hardware
(516) 944-1757
3A Soundview Market Place, Clearview Cinema Theater
Port Washington, NY
Lowe's
(718) 758-2910
5602 Avenue U
Brooklyn, NY
Costello's Ace Hardware
(631) 694-1100
1102 Broadhollow Rd, Corner of Rte. 110 & Main St.
Farmingdale, NY
Trio Hardware
516-935-8385
1032 C Old Country Rd
Plainview, NY
The Home Depot
(718)828-1071
2560 Bruckner Blvd
Bronx, NY
Monster Woodshop
888-506-6678
607 18th Street
Brooklyn, NY
BRUCKNER LUMBER & BUILDING SUPPLY
(718) 585-8787
259 Bruckner Blvd Bronx, NY, 10454
Bronx, NY
Ace Hardware of Rockville Centre
(516) 568-2301
315 Sunrise Hwy, between Morris and N.Park
Rockville Centre, NY
Dick's Do it Best Hardware
212-425-1070
9 Gold Street
New York, NY
The Home Depot
(718)862-9800
1806 E Gunhill Rd
Bronx, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 14, 2008

By Section Editor: Mike Morris

Drywall Cutting

The BladeRunner drywall cutting tool is an amazing innovation that does the seemingly impossible. The tool separates into two, and then, connected only by powerful built-in magnets, the half placed on one side of a drywall sheet precisely follows the cut line of the tool half on the opposite side, scoring both sides of 1/2-inch or 5/8-inch drywall simultaneously to make straight, curved, or angle cuts in a single pass. Price: $80. 866-562-4229. GoldblattBladeRunner.com .

Multifunction Bench

Vika USA

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights. The MDF-surface work table setup includes a surge-protected 120-volt power strip. Price: $150. 800-845-2872. vikausa.com .

Click here to read full article from Tools of the Trade