Drywall Cutting and Multifunction Bench Brockport NY

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights.

Local Companies

Ace Hardware Rochester
(585) 594-1110
3861 Buffalo Rd, West of Manitou Rd.
Rochester, NY
HARMCO FASTENER CO INC
585-546-1650
428 State Street Rochester, NY, 14608
Rochester, NY
Gillett's Hardware
585-548-2278
6330 Townline Road
Byron, NY
Kmart 3295 / Cross Merch
(716) 227-4350
3049 W Ridge Rd
Rochester, NY
Kmart 3282 / Cross Merch
(585) 426-0760
810 Paul Rd
Rochester, NY
Woodcraft - Rochester
585-292-9690
Henrietta Plaza
Rochester, NY
Mayer Hardware, Inc
(585) 288-7665
226 Winton Rd N
Rochester, NY
LOWE'S OF GREECE, NY
585 453-7500
3150 WEST RIDGE ROAD ROCHESTER, NY, 14626
Rochester, NY
The Home Depot
(585)342-0970
1111 E Ridge Rd
Rochester, NY
Greece Ridge Ctr
(585) 723-5300
317 Greece Ridge Center Dr
Rochester, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 14, 2008

By Section Editor: Mike Morris

Drywall Cutting

The BladeRunner drywall cutting tool is an amazing innovation that does the seemingly impossible. The tool separates into two, and then, connected only by powerful built-in magnets, the half placed on one side of a drywall sheet precisely follows the cut line of the tool half on the opposite side, scoring both sides of 1/2-inch or 5/8-inch drywall simultaneously to make straight, curved, or angle cuts in a single pass. Price: $80. 866-562-4229. GoldblattBladeRunner.com .

Multifunction Bench

Vika USA

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights. The MDF-surface work table setup includes a surge-protected 120-volt power strip. Price: $150. 800-845-2872. vikausa.com .

Click here to read full article from Tools of the Trade

Related Articles
- Home Improvement Tools Brockport NY
Aluminum Low-Profile side boxes maximize storage space without compromising rear-window visibility. The low-profile design sits just above the bed rail to keep rear sight lines intact. The reduced height is offset by an increased width to provide a larger storage area.
- Festool Joining System Brockport NY
- Framer's Guide to Engineered Lumber Brockport NY
- Hand-Held Power Saws Brockport NY
- Electric Chainsaws Brockport NY
- Festool Circ Saw and Guide Rail System Brockport NY
- Dry Window Products Brockport NY
- Hand Tools Brockport NY
- Drywall Finishing Brockport NY