Drywall Cutting and Multifunction Bench Brewster NY

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights.

Local Companies

Fastenal- Danbury
203-792-2898
10 Federal Rd Danbury, CT, 06810
Danbury, CT
Ring's End Lumber/Bethel
(203) 797-1212
9 Taylor Ave Bethel, CT, 06801
Bethel, CT
Chubby's Hardware
(914) 764-5125
68 Westchester Ave
Pound Ridge, NY
The Home Depot
(845)896-0824
450 State Route 9
Fishkill, NY
Kmart 9414 / Cross Merch
(914) 243-3685
Rte 118 355 Downing
Yorktown Hts, NY
Williams Lumber Inc
(845) 221-2751
908 Route 82
Hopewell Junction, NY
Fastenal- Fishkill
845-897-4721
115 Old Route 9 Fishkill, NY, 12524
Fishkill, NY
Ring's End Lumber/South Salem
(914) 533-2517
Rte. 123 Smithfield Rd South Salem, NY, 10590
South Salem, NY
Kelloggs & Lawrence
914-232-3351
26-30 The Parkway
Katonah, NY
Sears Home Appliance Showroom
(914) 241-2291
360 N Bedford Rd
Mt Kisco, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 14, 2008

By Section Editor: Mike Morris

Drywall Cutting

The BladeRunner drywall cutting tool is an amazing innovation that does the seemingly impossible. The tool separates into two, and then, connected only by powerful built-in magnets, the half placed on one side of a drywall sheet precisely follows the cut line of the tool half on the opposite side, scoring both sides of 1/2-inch or 5/8-inch drywall simultaneously to make straight, curved, or angle cuts in a single pass. Price: $80. 866-562-4229. GoldblattBladeRunner.com .

Multifunction Bench

Vika USA

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights. The MDF-surface work table setup includes a surge-protected 120-volt power strip. Price: $150. 800-845-2872. vikausa.com .

Click here to read full article from Tools of the Trade

Related Articles
- Festool Joining System Brewster NY
Festool's Domino isn't just a brand new type of joining tool; it's a whole new joining system. Based on mortise-and-tenon joinery, the Domino combines the qualities of biscuits and dowels with a stronger, self-aligning joint.
- Hand Tools Brewster NY
- Festool Circ Saw and Guide Rail System Brewster NY
- Hand-Held Power Saws Brewster NY
- Electric Chainsaws Brewster NY
- Dry Window Products Brewster NY
- Drywall Finishing Brewster NY
- Framer's Guide to Engineered Lumber Brewster NY
- Home Improvement Tools Brewster NY