Drywall Cutting and Multifunction Bench Bellmore NY

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights.

Local Companies

Roberts Plywood Co.
800-422-4944
45 North Industry Court
Deer Park, NY
Costello's Ace Hardware
(516) 798-5757
5135 Merrick Rd, Gino's
Massapequa Park, NY
Herman's Has Everything
800-273-4376
1070 Linwood Street Brooklyn, NY, 11208
Brooklyn, NY
Northport Hardware Company
631-261-4449
90 Main Street
Northport, NY
Lowe's
(516) 733-7840
920 South Broadway
Hicksville, NY
EXOTIC WOODS USA
(631) 651-8651
698 Fort Salonga Rd
Northport, NY
Suburban Mills
631-351-6445
16 Railroad St
Huntington Station, NY
Soundview Hardware
(516) 944-1757
3A Soundview Market Place, Clearview Cinema Theater
Port Washington, NY
Five Star Lumber & Home Ctrs
516-872-2700
210 E Merrick Rd
Valley Stream, NY
Ferreteria Del Hogar True Value Hdwe.
(787) 793-1874
5 Tabonuco Caparra Ind Park
Guaynabo, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 14, 2008

By Section Editor: Mike Morris

Drywall Cutting

The BladeRunner drywall cutting tool is an amazing innovation that does the seemingly impossible. The tool separates into two, and then, connected only by powerful built-in magnets, the half placed on one side of a drywall sheet precisely follows the cut line of the tool half on the opposite side, scoring both sides of 1/2-inch or 5/8-inch drywall simultaneously to make straight, curved, or angle cuts in a single pass. Price: $80. 866-562-4229. GoldblattBladeRunner.com .

Multifunction Bench

Vika USA

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights. The MDF-surface work table setup includes a surge-protected 120-volt power strip. Price: $150. 800-845-2872. vikausa.com .

Click here to read full article from Tools of the Trade

Related Articles
- Hand Tools Bellmore NY
The Sonic Tape, a distance-measuring device from AGL Lasersource can be used to determine length, width, and height and to compute area and volume. The tool has a range from 2 feet to 50 feet and an accuracy of 99.5 percent.
- Dry Window Products Bellmore NY
- Framer's Guide to Engineered Lumber Bellmore NY
- Drywall Finishing Bellmore NY
- Hand-Held Power Saws Bellmore NY
- Electric Chainsaws Bellmore NY
- Home Improvement Tools Bellmore NY
- Festool Circ Saw and Guide Rail System Bellmore NY
- Festool Joining System Bellmore NY