Drywall Cutting and Multifunction Bench Auburn NY

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights.

Local Companies

Fastenal- Auburn
315-258-8054
360 Grant Ave Auburn, NY, 13021
Auburn, NY
Alpine Building Supply
315-497-1221
Route 38
Moravia, NY
Valu Home Centers
315-471-1280
4671 Onandaga Blvd
Syracuse, NY
Moravia True Value Hardware
(315) 497-1966
102 Main St
Moravia, NY
Westvale Plz
(315) 488-1180
2214 W Genesse St
Syracuse, NY
Lowe's
(315) 253-3410
299 Grant Avenue
Auburn, NY
Elbridge Ace Hardware
(315) 689-3218
237 E Main St, Big M Plaza
Elbridge, NY
Ferrara & Sons Bldg. Supp.,inc
315-568-9431
30 West Bayard Street
Seneca Falls, NY
Nightingale True Value Hdwe
(315) 673-2001
4068 South St
Marcellus, NY
The Home Depot
(315)252-4540
1634 Clark Street Road
Auburn, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 14, 2008

By Section Editor: Mike Morris

Drywall Cutting

The BladeRunner drywall cutting tool is an amazing innovation that does the seemingly impossible. The tool separates into two, and then, connected only by powerful built-in magnets, the half placed on one side of a drywall sheet precisely follows the cut line of the tool half on the opposite side, scoring both sides of 1/2-inch or 5/8-inch drywall simultaneously to make straight, curved, or angle cuts in a single pass. Price: $80. 866-562-4229. GoldblattBladeRunner.com .

Multifunction Bench

Vika USA

The Twofold Workbench & Scaffold from Vika USA is lightweight yet rated to support up to 500 pounds. The 19x46-inch work platform folds flat for transport and opens to 22- and 32-inch heights. The MDF-surface work table setup includes a surge-protected 120-volt power strip. Price: $150. 800-845-2872. vikausa.com .

Click here to read full article from Tools of the Trade

Related Articles
- Home Improvement Tools Auburn NY
Aluminum Low-Profile side boxes maximize storage space without compromising rear-window visibility. The low-profile design sits just above the bed rail to keep rear sight lines intact. The reduced height is offset by an increased width to provide a larger storage area.
- Framer's Guide to Engineered Lumber Auburn NY
- Festool Circ Saw and Guide Rail System Auburn NY
- Festool Joining System Auburn NY
- Electric Chainsaws Auburn NY
- Hand Tools Auburn NY
- Dry Window Products Auburn NY
- Drywall Finishing Auburn NY
- Hand-Held Power Saws Auburn NY