Drape Wall and Cloak Wall Orchard Park NY

Two discrete wall systems based on the same concept of modularity, Drape Wall and Cloak Wall both provide alternatives to stick construction for single-family homes in Orchard Park.

Local Companies

Hughesco Of Buffalo
716-691-HOME
140 Irwin Place
Amherst, NY
Forbes - Capretto Homes
716-688-5597
Buffalo, NY
Heartland Homes
716-626-1919
Buffalo, NY
Piotrowski Builder- Developer, Inc.
716-675-6216
Buffalo, NY
TJW Custom Homes, Inc.
716-652-2798
Buffalo, NY
Life Style Communities
P.O. Box 945
Hamburg, NY
C.M.K. Builders of Alden, Inc.
716-870-6016
Buffalo, NY
Glorified Development, Inc.
716-677-4743
Buffalo, NY
MDs Renovations and Construction
716-912-6900
Buffalo, NY
Schuster Construction
716-681-8847
Buffalo, NY
Data Provided by:
    

Provided By:

Source: ARCHITECT Magazine
Publication date: August 1, 2008

By Katie Gerfen

Two discrete wall systems based on the same concept of modularity, Drape Wall and Cloak Wall both provide alternatives to stick construction for single-family homes.

Drape Wall features a system of vacuum-formed plastic bricks that snap together on an aluminum frame to form a building's exterior shell. Some bricks are opaque and others are perforated to serve as windows and to allow ventilation. On the interior, the exposed aluminum frame is covered with a quilt or drape that serves as insulation. The quilt incorporates a layer of waterproofing and a layer of insulation that also manages acoustics. Flaps can be opened and closed to expose the perforated bricks, allowing natural light and air to enter the space.

A newer exterior wall system, Cloak Wall, expands on the principles of Drape Wall. Instead of using framing for support, the bricks of Cloak Wall are held in place by compression forces from a system of tightened wires. When a structure is built using Cloak Wall, bricks can be set in place to permit larger or smaller window openings depending on the climate. Once the position is set, bricks are clamped to the foundation by a system of tension cables. The exterior is painted with automotive paint that shifts hue depending on the angle of the sun, regulating heat absorption and therefore interior temperature. In Cloak Wall, the waterproofing barrier is a separate layer of ETFE plastic that is installed between the bricks and the quilt. The quilt itself is expanded to integrate lighting fixtures and storage pockets.

Click here to read full article from Architect Magazine

Related Articles
- Flashing in Siding Installations Orchard Park NY
A constant problem that contractors see in siding installations is improper flashing or, even worse, no flashing at all. Relying on caulk alone to keep water from leaking into homes is not a good practice. Whether you're talking about wood, fiber-cement, or vinyl siding, three areas in particular can prove problematic.
- High-Efficiency Products Orchard Park NY
- How Masonry Buildings Resist Earthquakes Orchard Park NY
- Galvanized Wall Ties Orchard Park NY
- Galvanized Wall Ties Orchard Park NY
- Inner Corner at Base of Wall Orchard Park NY
- Foolproof Layout Method Plans Orchard Park NY
- Flashing Factors Orchard Park NY
- Fan-Fold Foam Board Orchard Park NY
- Home Siding Tips Orchard Park NY