Drape Wall and Cloak Wall East Setauket NY

Two discrete wall systems based on the same concept of modularity, Drape Wall and Cloak Wall both provide alternatives to stick construction for single-family homes in East Setauket.

Local Companies

A & D Quality Home Improvements
203-847-1658
Po Box: 2055
Norwalk, CT
Center for Green Building
(203) 382-0774
3380 Fairfield Avenue
Bridgeport, CT
A. Oliveri Siding & Remodeling
(631) 588-5032
250 Donald Blvd
Holbrook, NY
Old Newtown Builders, LLC
800-858-8941
Bridgeport, CT
True North Partners, LLC
203-258-7372
Bridgeport, CT
12 Gage Electric
(631)451-0601
63 Iriquois Avenue
Selden, NY
Amd Custom Homes
570-730-8150
Po Box 121
Brookhaven, NY
AMRO Supply Inc. - Green Stuff Absorbents
(631) 419-1203
140-11 Keyland Ct.
Bohemia, NY
David Popoff Carpentry
203-228-0646
Bridgeport, CT
Quaker Hill Builders, LLC
203-869-4064
Bridgeport, CT
Data Provided by:
    

Provided By:

Source: ARCHITECT Magazine
Publication date: August 1, 2008

By Katie Gerfen

Two discrete wall systems based on the same concept of modularity, Drape Wall and Cloak Wall both provide alternatives to stick construction for single-family homes.

Drape Wall features a system of vacuum-formed plastic bricks that snap together on an aluminum frame to form a building's exterior shell. Some bricks are opaque and others are perforated to serve as windows and to allow ventilation. On the interior, the exposed aluminum frame is covered with a quilt or drape that serves as insulation. The quilt incorporates a layer of waterproofing and a layer of insulation that also manages acoustics. Flaps can be opened and closed to expose the perforated bricks, allowing natural light and air to enter the space.

A newer exterior wall system, Cloak Wall, expands on the principles of Drape Wall. Instead of using framing for support, the bricks of Cloak Wall are held in place by compression forces from a system of tightened wires. When a structure is built using Cloak Wall, bricks can be set in place to permit larger or smaller window openings depending on the climate. Once the position is set, bricks are clamped to the foundation by a system of tension cables. The exterior is painted with automotive paint that shifts hue depending on the angle of the sun, regulating heat absorption and therefore interior temperature. In Cloak Wall, the waterproofing barrier is a separate layer of ETFE plastic that is installed between the bricks and the quilt. The quilt itself is expanded to integrate lighting fixtures and storage pockets.

Click here to read full article from Architect Magazine

Related Articles
- Home Siding Tips East Setauket NY
After installing window and door trim, either make flashing using a sheet metal brake or apply flashing pre-bent to the correct trim size. Nail your flashing to the wall, not to the trim, because if you put holes in the flashing, you've defeated its purpose.
- High-Efficiency Products East Setauket NY
- Foolproof Layout Method Plans East Setauket NY
- Fan-Fold Foam Board East Setauket NY
- Flashing Factors East Setauket NY
- Galvanized Wall Ties East Setauket NY
- How Masonry Buildings Resist Earthquakes East Setauket NY
- Flashing in Siding Installations East Setauket NY
- Inner Corner at Base of Wall East Setauket NY
- Galvanized Wall Ties East Setauket NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details