Building Masonry Feature Walls Nyack NY

Feature walls in Nyack are made of materials like masonry, brickwork, resin coatings, timber, concrete and gypsum. This can be built up during construction of the house mostly concrete, timber, brickwork and masonry or cladded. For other types they are normally cladding's on finished walls. This are found in niches, above chimney breasts, lobby, lounge, bay window, dinning and family room walls.

Local Companies

K B Masonry LLC
(973) 831-0018
58 Townsend Road
Wanaque, NJ
Excellent Building Material Llc
(718) 832-5000
711 3rd Ave
Brooklyn, NY
Ring's End of Lewisboro Inc
(914) 533-2517
386 Smith Ridge Rd
South Salem, NY
Tracy Lumber Co
(518) 548-7731
Old Page Rd
Lake Pleasant, NY
Gypsum Services
(716) 694-7442
7330 Townline Rd
North Tonawanda, NY
E C Hufnagel Landscaping Inc
(201) 869-5680
51 Broad Ave Apt 1
Fairview, NJ
park place pavers
(914)667-1735
255 rich ave
mount vernon, NY
ABC Supply Inc
(607) 786-3316
3125 Pearl St
Endicott, NY
Signature Metals Inc
(212) 874-2207
1900 Broadway
New York, NY
Allied Building Products Corp
(718) 448-0170
244 Arlington Ave
Staten Island, NY

Provided By:

How to make a masonry feature wall

Author: Andrew Karundu

Feature walls are made of materials like masonry, brickwork, resin coatings, timber, concrete and gypsum. This can be built up during construction of the house mostly concrete, timber, brickwork and masonry or cladded. For other types they are normally claddings on finished walls. This are found in niches, above chimney breasts, lobby, lounge, bay window, dinning and family room walls. The level of works determines the type of finish to be used.

When making feature walls, the location is very important. For niches coats have good aesthetic as they are rich in color. When working in the rooms check the corresponding finish to give a contrast to the wall. Commence the work by hacking off the surfaces for finished walls to receive the finish. Use chisel dressed fair face stones with a thickness of one inch. Cut the stones into slates of atleast one foot in length and various widths.

In masonry feature wall construction, stone slates are patterned as desired. Use a straight edge at the bottom to level the works. Spread cement grouting to the pieces and commence working from the bottom upwards. Lay the pieces block wise to the end of hacked area. Remember to pound them to spread the cement behind to avoid hollow spaces. Use joint less bonding. Keep joints alternate on each row to the top and complete marked area. Brush off cement.

After the feature masonry wall is complete, rake out the bonding horizontal joints. Use a rounded bar of a quarter inch for horizontal key pointing. Remove arising debris and make good floor joint if the wall had commenced from the floor. When this is done give a week and to allow curing. Paint clear vanish in Matt or gloss as desired. For a rustic finish don't varnish. The method can be repeated for brickwork, rustic tiles, rubble and grano materials.

About the Author:

Andrew Karundu Is A Building Economist, Providing Home Based Solutions To Fixing, Repairing, Remodeling And Redesigning Homes. He Uses Simple Tried And Tested Methods To Improve Family Lifestyles.Visit His Site Here For Adequate Information On Most HOME IMPROVEMENT SOLUTIONS .

Article Source: http://www.articlesbase.com/remodeling-articles/how-to-make-a-masonry-feature-wall-991942.html

Related Articles
- Powered Hand Tools Nyack NY
The AS160 Brick + Mortar saw cuts through a variety of materials. The product features Allsaw technology, which uses an orbital cutting motion with two forward facing blades that combine to perform both a hammering and sawing action.
- Using Wrought Iron Wall Decor to Accent White Walls Nyack NY
- Getting Your Home in Shape for Summer Nyack NY
- Brick Work Nyack NY
- Interior Stucco Walls Nyack NY
- How to Clean a Fireplace Nyack NY
- How to Clean a Shower/Tub the Easy Way Nyack NY
- Integrating Parapet and Roofing Flashing Nyack NY
- How to Clean Any Room Nyack NY
- Saving Water and Money Nyack NY