Building Masonry Feature Walls Hopewell Junction NY

Feature walls in Hopewell Junction are made of materials like masonry, brickwork, resin coatings, timber, concrete and gypsum. This can be built up during construction of the house mostly concrete, timber, brickwork and masonry or cladded. For other types they are normally cladding's on finished walls. This are found in niches, above chimney breasts, lobby, lounge, bay window, dinning and family room walls.

Local Companies

Lowes Home Improvement Warehouse of Medford
(631) 207-4541
2796 Route 112
Medford, NY
88 - Bc Building Supplies Inc
(607) 693-3200
165 State Highway 7
Harpursville, NY
Franklinville Home Center
(716) 676-9964
3016 Bakerstand Rd
Franklinville, NY
Reserve Supl of Centrl Ny Inc
(315) 463-4557
200 Midler Park Dr
Syracuse, NY
Allied Building Products
(914) 285-0002
3310 Merritt Ave
Bronx, NY
Eco Roof
(718) 937-1332
2535 36th St
Astoria, NY
Bruce Hall True Value Home Center
(607) 547-9961
206 Main St
Cooperstown, NY
Beckerle Lumber Supply Co Inc
(845) 359-4633
219 Route 303
Orangeburg, NY
Griffin Group
(718) 383-3388
38 Java St
Brooklyn, NY
Lowe's Home Improvement Warehouse of Amherst
(716) 831-5990
1659 Niagara Falls Blvd
Buffalo, NY

Provided By:

How to make a masonry feature wall

Author: Andrew Karundu

Feature walls are made of materials like masonry, brickwork, resin coatings, timber, concrete and gypsum. This can be built up during construction of the house mostly concrete, timber, brickwork and masonry or cladded. For other types they are normally claddings on finished walls. This are found in niches, above chimney breasts, lobby, lounge, bay window, dinning and family room walls. The level of works determines the type of finish to be used.

When making feature walls, the location is very important. For niches coats have good aesthetic as they are rich in color. When working in the rooms check the corresponding finish to give a contrast to the wall. Commence the work by hacking off the surfaces for finished walls to receive the finish. Use chisel dressed fair face stones with a thickness of one inch. Cut the stones into slates of atleast one foot in length and various widths.

In masonry feature wall construction, stone slates are patterned as desired. Use a straight edge at the bottom to level the works. Spread cement grouting to the pieces and commence working from the bottom upwards. Lay the pieces block wise to the end of hacked area. Remember to pound them to spread the cement behind to avoid hollow spaces. Use joint less bonding. Keep joints alternate on each row to the top and complete marked area. Brush off cement.

After the feature masonry wall is complete, rake out the bonding horizontal joints. Use a rounded bar of a quarter inch for horizontal key pointing. Remove arising debris and make good floor joint if the wall had commenced from the floor. When this is done give a week and to allow curing. Paint clear vanish in Matt or gloss as desired. For a rustic finish don't varnish. The method can be repeated for brickwork, rustic tiles, rubble and grano materials.

About the Author:

Andrew Karundu Is A Building Economist, Providing Home Based Solutions To Fixing, Repairing, Remodeling And Redesigning Homes. He Uses Simple Tried And Tested Methods To Improve Family Lifestyles.Visit His Site Here For Adequate Information On Most HOME IMPROVEMENT SOLUTIONS .

Article Source: http://www.articlesbase.com/remodeling-articles/how-to-make-a-masonry-feature-wall-991942.html